TALL, MOVING COLOR THAT MARKS A DRIVEWAY FROM DOWN THE BLOCK
A row of feather flags does what a sign cannot: it moves in the lightest breeze, marking a driveway from down the block. Flags are cheap to run several, easy to set up, and quick to swap when the message changes. What decides whether they last is the pole, the base, and whether the print goes through the fabric or sits one side. R&R Tents & Events prints flags in Los Angeles, CA for storefronts, dealerships, and events across San Diego, Ventura, Kern County, and Orange County.
We build feather, teardrop, and blade shapes on aluminum or fiberglass poles, printed so both sides read cleanly, and supply the ground spike, cross base, or water base your surface needs. Fabric weight and pole flex suit whether the flag stands indoors, on a lawn, or on an exposed forecourt. That comes from 25+ years of fabrication. Start your custom project through the quote request page.
FLAGS WE PRINT
FEATHER FLAGS
The tall, curved-top shape that reads as a flag from a distance and moves in the lightest breeze. Common heights run roughly 8 to 15 feet on a flexible pole, printed in your colors with a logo or message.
TEARDROP FLAGS
A rounded, tensioned shape that holds its form even in low wind, so the message stays readable when a feather flag would hang limp. The taut fabric suits sites where you want the print legible at all times.
BLADE AND RECTANGULAR FLAGS
Straight-edged upright shapes that carry more copy than a feather flag and suit rows lined along a frontage. The flat profile keeps type square and readable, useful for pricing, offers, or a longer message.
CUSTOM AND COUNTRY FLAGS
Traditional rectangular flags for poles and buildings, printed to your artwork or a national design, hemmed with a canvas header and brass grommets or a pole sleeve to suit your existing flagpole hardware.
POLE HARDWARE AND BASES
Ground spikes for grass, cross bases and weighted bases for hard surfaces, and water-fillable bases for indoor or paved use. The base is matched to the surface so the flag stands secure without staking where it cannot.
REPLACEMENT FLAGS AND REBRANDS
Poles and bases outlast the printed fabric, so a faded or outdated flag is reprinted on its own while the hardware stays. That keeps a rebrand or a seasonal refresh cheap and quick across a row of flags.
Internal baffles hold a unit's shape, and when one lets go the whole structure sags regardless of pressure. These repairs mean opening the piece, working inside it, and closing it again properly, which is why they are rarely a field job.
Our Services1
WHY CHOOSE US FOR FLAGS
PRINTED TO READ ON BOTH SIDES
A flag seen from both directions should read cleanly either way. We print through the fabric or build double-sided with a blockout layer, so the message is legible whichever side a passer-by approaches from.
THE RIGHT SHAPE FOR THE WIND
Feather flags move and catch the eye in a breeze, teardrops hold their shape in low wind so the print stays readable. We match the shape to how much movement and legibility the site needs.
BASES MATCHED TO THE SURFACE
A flag staked into a lawn stands differently from one on sealed concrete. Ground spikes, cross bases, and water bases are supplied to suit the surface, so the flag holds without improvising with whatever is handy.
COLOR THAT HOLDS IN THE SUN
A row of flags fading at different rates looks neglected. Print and fabric are chosen to hold color through a season of Southern California sun, so the set stays consistent rather than drifting shade by shade.
PART OF THE SAME BRAND SHEET
Because flags, banners, inflatables, and canopies are printed in one building, the color and logo match across the whole campaign. Flags arrive as part of the set rather than a shade off from another vendor.
HARDWARE THAT OUTLASTS THE PRINT
Poles and bases are built to keep working long after the fabric fades. Reprinting just the flag onto existing hardware is cheap and fast, which makes a seasonal refresh or a rebrand simple across a whole row.
A ROW OF FLAGS SAYS SOMETHING IS HAPPENING HERE
Flags are the quiet workhorses of a frontage. A single one marks an entrance, a row of them signals something is happening, and they pull the eye without shouting. Getting them right means the shape that suits your wind, the base that suits your surface, print that reads both sides, and color that holds through the sun. R&R Tents & Events prints those flags in Los Angeles, CA as part of the same set as your banners and inflatables. Send your artwork and the shapes you want through the quote request page to start your custom project.
FREQUENTLY ASKED QUESTIONS
What is the difference between a feather flag and a teardrop flag?
A feather flag has a tall, curved top and flutters in the lightest breeze, drawing the eye with movement. A teardrop is a taut, rounded shape that holds its form in low wind, keeping the message readable at all times.
Are flags printed on one side or both?
Both options exist. Single-sided print shows a faint mirror image on the reverse, which is fine for many uses. Double-sided construction with a blockout layer gives a clean, correct image on each face for high-traffic sites.
What base do I need for a flag?
It depends on the surface. A ground spike suits grass and soil, a cross base or weighted base suits hard ground, and a water-fillable base suits indoor or paved use. R&R Tents & Events supplies each to match.
How tall are feather and teardrop flags?
Common heights run roughly 8 to 15 feet on the pole, with taller versions for greater visibility. Taller flags flex more in wind and need a heavier base, so height is matched to the site and the exposure.
How much wind can a flag take?
Feather and teardrop flags handle everyday wind well, since the flexible pole bends rather than snapping. In strong or gusting wind it is safer to lower them, as sustained hard wind wears the fabric and can stress the base.
Can flags be used indoors?
Yes. A water-fillable or cross base holds a flag upright indoors for showrooms, expos, and lobbies, with no staking needed. Height is set against the ceiling, and the same printed flag works indoors and out.
How long do printed flags last?
A flag in regular outdoor use generally holds its color for a season or two before the fabric fades, and longer with careful storage. Because the print wears before the pole, reprinting just the flag is the usual fix.
Can I match flags to my other signage?
Yes. Because flags, banners, canopies, and inflatables are printed in the same building against one brand sheet, the color and logo stay consistent across the whole set rather than drifting between separate suppliers.