PRINTED, HEMMED, AND GROMMETED FOR REAL OUTDOOR USE
A banner is the workhorse of outdoor advertising, cheap enough to reprint each season and quick to hang, but only if built for the wall or fence it goes on. One sagging from two corners or shredding on an exposed run is a false economy, which is why hemming, grommet spacing, and the vinyl or mesh choice matter as much as the print. R&R Tents & Events prints banners in Los Angeles, CA for storefronts, events, and worksites across San Diego, Ventura, Kern County, and Orange County.
We run large-format graphics in-house, hem every edge, and set grommets at the spacing the surface needs, then finish with pole pockets, reinforced corners, or wind slits where the location calls for them. Solid vinyl suits walls and backdrops, while mesh lets wind pass through on an exposed run. That in-house printing comes from 25+ years of fabrication. Start your custom project through the quote request page.
BANNERS WE PRINT
VINYL STOREFRONT AND EVENT BANNERS
Solid heavy vinyl for storefronts, stages, and event backdrops, printed in full color and hemmed on every edge. Grommets are set at spacing suited to the wall or frame, so the banner hangs flat instead of sagging.
MESH FENCE BANNERS
Perforated mesh lets wind pass through, which keeps a large banner from acting as a sail on an exposed fence or building face. The trade-off is a slightly softer image, well worth it on a windy run.
POLE AND LAMP-POST BANNERS
Double-sided banners with sewn pole pockets top and bottom, sized to standard bracket hardware for streets, campuses, and shopping centers. Printed both sides so the message reads to traffic arriving from either direction.
STEP-AND-REPEAT BACKDROPS
Repeating-logo backdrops for press walls, red carpets, and photo areas, printed on matte fabric or vinyl to control glare. Sized to the frame or stand so logos land at the right height for the camera.
RETRACTABLE AND BANNER STANDS
Roll-up retractable stands and X-frame banners for trade shows, lobbies, and indoor events, printed on curl-resistant film. They pack into a shoulder case, set up in under a minute, and stand without any tools.
LARGE-FORMAT BUILDING BANNERS
Oversized wall and scaffold banners for construction hoardings, dealerships, and building wraps, engineered with reinforced hems and wind slits. Ballasted or through-bolted mounting is specified against the height and the exposure of the wall.
Internal baffles hold a unit's shape, and when one lets go the whole structure sags regardless of pressure. These repairs mean opening the piece, working inside it, and closing it again properly, which is why they are rarely a field job.
Our Services1
WHY CHOOSE US FOR BANNERS
FINISHED FOR THE SURFACE IT HANGS ON
A banner fails at the edges first. We hem every side, set grommets where the load lands, and add pole pockets or wind slits to suit the wall, fence, or frame the banner will actually hang from.
VINYL OR MESH, MATCHED TO THE WIND
Solid vinyl gives the sharpest image on a sheltered wall, mesh survives an exposed run by letting wind through. We match the material to the exposure rather than printing everything on the same stock.
COLOR THAT HOLDS OUTDOORS
Standard inks fade within months in full sun. UV-cured and solvent printing hold color far longer, so a banner that stays up all season still reads as intentional rather than sun-bleached and tired by August.
FILES CHECKED BEFORE PRINTING
A logo that looks fine on screen can print soft at banner scale. We check resolution and color before committing a run, and flag anything that will pixelate rather than discovering it after the vinyl is cut.
PART OF THE SAME CAMPAIGN
Because we print inflatables, canopies, and flags in the same building, your banners match the rest of the set against one brand sheet instead of arriving a shade off from a separate vendor.
QUICK REPRINTS WHEN THE MESSAGE CHANGES
Sales end, sponsors change, and dates roll over. A banner reprint is fast and cheap, and because your files stay on our system, the next run matches the last one instead of drifting.
THE PIECE YOU REPRINT WITHOUT A SECOND THOUGHT
A banner is the cheapest, fastest piece in an outdoor campaign, which is exactly why it gets treated carelessly and fails early. Built properly, with hemmed edges, grommets where the load lands, the right material for the wind, and ink that holds color through a season, it becomes the workhorse it should be. R&R Tents & Events prints those banners in-house in Los Angeles, CA, matches them to the rest of your signage, and keeps your files ready for the next reprint. Send your artwork and the size you need through the quote request page to start your custom project.
FREQUENTLY ASKED QUESTIONS
What is the difference between a vinyl banner and a mesh banner?
Solid vinyl gives the sharpest, most saturated image and suits sheltered walls and backdrops. Mesh is perforated so wind passes through, which keeps a large banner from tearing on an exposed fence or high building face.
How are banners hung?
Most use grommets, metal rings set into hemmed edges, tied or bungeed to a wall, frame, or fence. Pole banners use sewn pockets instead, and large building banners are through-bolted or ballasted against the wind.
Will an outdoor banner survive wind?
A hemmed banner grommeted at proper spacing handles ordinary wind well. On exposed runs, mesh or added wind slits let air through so the banner does not act as a sail. Corners are reinforced where the load concentrates.
What file format do you need for a banner?
Vector artwork is ideal, since it scales to any size without softening. High-resolution raster files work when they are built at or near full size. R&R Tents & Events checks every file before printing for clients in Los Angeles, CA.
How long does an outdoor banner last?
A quality vinyl banner with UV-cured or solvent print typically holds up a few years of outdoor exposure before color fades. Taking it down and storing it dry between uses stretches that considerably, since sun and moisture cause the wear.
Can a banner be printed on both sides?
Yes. Pole and lamp-post banners are printed double-sided so they read to traffic from either direction, using a blockout layer between the faces so one side does not ghost through to the other.
What sizes do banners come in?
Banners are printed to almost any dimension, from small 2 by 4 foot storefront signs to oversized building banners many feet across. R&R Tents & Events sizes each one to the wall, fence, or frame it will hang on.
Can you match a banner to my other signage?
Yes. Because banners, inflatables, canopies, and flags are printed in the same building against one brand sheet, the color and logo match across the whole set rather than drifting between separate vendors.