Custom Inflatable Manufacturing
Custom Inflatable Manufacturing
SHELTER THAT DEPLOYS BEFORE THE POLES COME OUT OF THE BAG
An inflatable tent with a 10 by 10 foot footprint reaches full pressure in 2 to 3 minutes with one person and a pump, while a 20 by 20 foot structure takes 10 to 15, which is a fraction of the time a comparable frame tent demands. R&R Tents & Events manufactures custom inflatable tents in Los Angeles, CA for race series, brand activations, festivals, and field operations across San Diego, Ventura, Kern County, and Orange County.
Air beams replace poles entirely, so there is no frame to bend, lose, or assemble in the wrong order. We print your artwork across the roof, the walls, and the interior faces, fit replaceable valves and end caps, and specify ballast against the wind exposure at your site. Backed by 25+ years of fabrication, we build both sealed-beam and constant-air versions. Send your sizes and artwork through our quote request page to start your custom project.
CUSTOM INFLATABLE TENTS WE MANUFACTURE
INFLATABLE DOME TENTS
Rounded shelters in footprints around 9 by 9, 13 by 13, and 16 by 16 feet that read as a landmark rather than a marquee. The curved form sheds wind well and gives an unusually large printed surface for the ground area used.
AIR-BEAM EVENT SHELTERS
Square and rectangular structures built on sealed beams running about 7 to 9 pounds per square inch. They hold shape without a running fan, which keeps a hospitality area quiet and removes the need for a nearby outlet.
INFLATABLE MISTING TENTS
Cooling stations for race courses, festivals, and outdoor worksites, with misting lines integrated during the build rather than strapped on later. Fabric and fittings are chosen specifically to handle constant moisture without staining, delaminating, or breaking down over a season.
BRANDED SPORTS AND RACE TENTS
Team paddocks, finish areas, and sponsor lounges printed across every visible face of the structure, including the underside of the roof, which is exactly what broadcast cameras and drone footage tend to capture from above during a live event.
CONNECTED TENT SYSTEMS
Multiple units joined into a corridor or a larger covered footprint using matched connecting sections. That lets a footprint grow for a bigger event and shrink back again afterward, without buying an entirely different structure for each occasion.
REPLACEABLE ROOFS AND PANELS
Roofs, inner tubes, valves, end caps, and pumps are all serviceable items rather than sealed-in components. A damaged roof or a rebranded panel gets swapped on its own, which extends the useful life of the original structure considerably.
WHY CHOOSE US FOR
CUSTOM INFLATABLE TENTS
UP IN MINUTES, NOT AN AFTERNOON
A frame tent of similar size commonly takes 30 to 60 minutes and several pairs of hands. Air beams collapse that to single figures, which changes what a small crew can realistically cover across a multi-site event day.
NO POLES TO LOSE OR BEND
Frame components disappear, corrode, and get bent on the third install, and a missing pole strands the whole structure. With the frame built directly into the fabric, there is nothing separate to inventory, transport, count, or replace later on.
BRANDING ON EVERY VISIBLE SURFACE
Roof, walls, valance, and interior faces all become printable area. Overhead shots from drones and grandstands see the roof more than anything else, so putting artwork up there earns coverage that a plain white top simply gives away.
PARTS YOU CAN ACTUALLY REPLACE
Structures fail at valves, seams, and roofs long before the whole thing wears out. Building those as replaceable items means a damaged tent gets repaired for a fraction of replacement, which matters over a long season of events.
STABLE WHEN THE WEATHER TURNS
Correctly anchored inflatable tents handle wind that flattens light pop-ups, with common ratings around 25 to 40 miles per hour by class. We specify anchoring weight against your site rather than quoting a rating and leaving it there.
ONE CREW, ONE VEHICLE
Because there is no frame, the packed weight and volume drop sharply. A structure that used to need a trailer and four people often fits in a van with two, which quietly reduces the cost of every single deployment.
FREQUENTLY ASKED QUESTIONS
How long does it take to set up an inflatable tent?
With an electric pump, a single person can raise a 10 by 10 foot tent in 2 to 3 minutes, a 16 by 16 in 7 to 10, and a 20 by 20 in 10 to 15 minutes.
What wind rating do inflatable tents carry?
Ratings vary quite a lot by class. Basic units are rated to roughly 25 miles per hour, outdoor-grade structures to 31 to 44, and heavy air-membrane builds considerably higher. The rating only holds when the anchoring matches what the manufacturer specifies.
Is an inflatable tent waterproof?
Quality event structures exceed 5,000 millimeters of hydrostatic head, which comfortably handles sustained rain. Seams and valve areas matter just as much as the fabric rating, since those are the points where water tends to find a way through first.
Does an inflatable tent need power to stay up?
Sealed-beam tents do not. They are pumped once and hold pressure without any fan running, which suits remote sites. Constant-air designs need a blower running throughout, and that noise is generally acceptable outdoors but rarely welcome inside an enclosed hall.
What material are inflatable tents made of?
Canopies are typically 600 denier coated polyester, while the beams themselves use a heavier reinforced PVC at around 14 to 19 ounces. R&R Tents & Events selects the combination against how long a structure stands in Los Angeles, CA.
Can the roof of an inflatable tent be replaced?
Roofs can be replaced, and it is one of the main reasons that these structures last so long. Roofs, air tubes, valves, and end caps are all serviceable parts, so damage or a rebrand does not force the replacement of an entire tent.
Can multiple inflatable tents be connected together?
Yes, using matched connector sections that maintain the pressure and the weather seal across the join. Planning the layout before production is well worthwhile, since connector positions have to be built into each structure during manufacture rather than added afterward.
Can an inflatable tent be printed inside and out?
It can, and the interior surface is very frequently overlooked. R&R Tents & Events prints roof undersides, wall interiors, and valances for clients in Los Angeles, CA, which puts branding into every single photograph taken from beneath the structure.
A TENT THAT TRAVELS AS WELL AS IT LOOKS
The real cost of an event structure shows up in the hours spent putting it up, the parts that go missing, and the trailer it needs to get anywhere. Air beams take most of that away, and what remains is a shelter your crew can raise in minutes, brand on every surface, and repair one component at a time. R&R Tents & Events builds those structures in Los Angeles, CA, sizes the anchoring to your actual site rather than a catalog figure, and keeps replacement parts on the shelf. Send your dimensions and artwork through the quote request page to start your custom project.